How To Make A Home Bow Without Many Tools
Last Updated on May 22, 2020
The bow is a favorite weapon worldwide where Native Americans use it as a hunting and fighting tool. If you want to learn how to make a homemade bow, I give you some simple tricks to do it without many materials. This will help you to go hunting on a picnic or just to surprise the friends of your great creativity. You dare?
Steps to Build a Home Arch
1. Look for a Piece of Wood to Make the Bow
This is the first step to learn how to make a homemade arch; you will only need:
A dry and dead piece of wood that has no cracks, such as oak, walnut, yew, carob, teak. The wood should be free of knots, sprouts or twists and it would be good if the branch is thicker in the center.
This piece of wood should be flexible like mulberry or juniper, you can use a cane stick or bamboo, but it should not be thick, to learn how to make a homemade arch should not be so thick because it is flexible and strong at the same time.
You can use live wood, and if necessary it is best to avoid it since it offers the same power, unlike dry wood.
2. Look at the Natural Curve of the Wood
Every bit of wood has a natural curve, no matter how small. As you build the arch, that curve will determine the characteristics of the arch, to find this curve places the wood on the ground and hold the end with one hand, and with the other press the wood gently will rotate from the center natural looking towards you and that the back facing outwards.
3. Locate the Ends of the Arch
These are the essential parts in the process of how to make a home arch so that you locate the handle make marks above and below. All this space within the marks is where the handle is located, and above is the top end, and below is the bottom end.
4. Shape the Arch
Place the end of the bow on the foot and your hand over the arch. Place one hand pressing out the bow facing towards you. You can do this method to know which side of the arc is flexible and which is not.
You can use a knife cut these inflexible points throughout the center of the wood, until the upper and lower ends so that they arch similarly to each other.
Check the progress of how to make the home arch in a detached manner, be extreme and be flexible with each other and you will be ready to continue to the next step.
5. The Ideal Is That Arch Is Flexible in the Handle
Carve wood from the center by exerting pressure on the entire back of the arch, since the smallest damage to the structure can break it completely.
6. Make Some Nicks to Hold the Bow Rope
To learn how to make a home bow, use a knife to make nicks that start on sides and curl toward the center of the arch in the direction of the handle.
You must make nicks at each end of the arch, remember that you should not make cuts in the back and they should not be deep that compromise the strengths of the ends, you have nicks with enough depth so that you can hold the rope in place.
7. Choose the Rope for the Bow
This rope should not be elastic since the force can dissipate to shoot this arrow comes from the wood and not from the rope. If you get stuck in the middle of nature, it is difficult to find the right wood, and you should try several tools before finding some that you need. Some materials that you can use for the bowstring are:
- Hemp Rope
- Thin nylon rope
- Cotton thread
- Normal twine
8. Put the Rope to the Bow
You have to make a loose bow with a strong knot at the ends of the rope before you put it on the end of the bow. Make the rope smaller than the length of your bow without it flexing and in this way the bow and the rope are tensioned.
9. Adjust the Arch
You can hang upside down from the branch of the tree so you can stretch the rope, pull the rope slowly checking to make sure that the ends bend evenly and that these nicks work, pull the rope well until they reach the same distance as there is from the hand to the jaw and the arm is fully extended.
10. Fabricates the Arrows
Select the clubs to make the body of the arrows
To learn how to make a home bow, you must have straight sticks, and that the wood is dry and dead the arrow must have the same length as the rope reaches so that it stretches, it serves to have arrows that you can not pull until you can reach the maximum potential. Consider these options so you can create arrows :
The wood that is cut works if you give it time to dry naturally since the sap of the tree can burn faster if you place it near the fire so that it dries.
There are other plants with which you can learn how to make a homemade bow, such as the solid or also known as goldenrod and these can be found in the field.
11. Shape the Arrow
You must carefully cut the wood around the circle of the arrow. You can stretch the arc by heating the shaft with charcoal, do not singe the wood and then place the arrow in a straight position until it cools. Make a slit in the back of your home arch so that the strings fit and this slit is called nock.
12. Sharpen the Point of the Arrow
You can make the point of the arrow by sharpening the end of the shaft; you can sharpen the arrow with a knife and put the point in the burning coal to give him strength, be careful not to singe the wood.
13. Place Pen on the Arrow
Although feathers can improve the ability for your arrow to fly, it is not as necessary. Look for the feathers to make the pluck and stick them around the lower end of the arrow inserts the feathers, wrap them more tightly with a thread if you do with this method you can use anything for the pluck.
These feathers act like a ship’s helm as it guides the arrow through the air to give you the millimeter position. The use of pens is something very difficult to perfect how to make a home bow. If the weapon is made for survival, placing the feathers is not a priority.
What do you think of these methods of how to make a home bow? You have one; in particular, you share with us.
You May Also Like to Read
Hi, I am John Campbell, an outdoor enthusiast. Just like you, I value the habitat, heritage and tradition of great outdoors. I do my best to make sure the correct research, writing, and photo are shown on Tacticalgearslab.com. Indeed, I am committed to preserving a great online experience for you.